Enable sata ahci driver after windows xp install

 · In UEFI or BIOS, find SATA settings to select the mode for memory devices. Switch them to AHCI, save settings and restart the computer. After the restart, Windows will start installation of SATA drivers, and when it is over, it will ask you for another restart. Do it, and AHCI mode in Windows will be enabled.5/5(22).  · Although SATA, AHCI and RAID enabled storage controllers have been around for several years, the Windows XP install CD never gained the ability to install directly onto this hardware, and you need a floppy disk with the necessary drivers for XP to be able to recognize your hard drives during setup.  · 1. First download and install the chipset driver and reboot, if you have not done so already. www.doorway.ru 2. Then download, unzip and save the SATA AHCI drivers I attached. 3. Right-click the My Computer icon, click Manage, select Device Manager. 4.

Although SATA, AHCI and RAID enabled storage controllers have been around for several years, the Windows XP install CD never gained the ability to install directly onto this hardware, and you need a floppy disk with the necessary drivers for XP to be able to recognize your hard drives during setup. Note: If you select AHCI for Serial ATA (SATA) in the BIOS Setup Utility before installing Intel Matrix Storage Manager Driver, your computer will not respond; it will only display a blue screen. 1. Start the BIOS Setup Utility menu. 2. Select "Config". 3. Select "Serial ATA (SATA)". 4. Select "Compatibility". 5. Install Windows XP and Service Pack 2. 6. Download Intel Matrix Storage Manager Driver from the Web site and. In UEFI or BIOS, find SATA settings to select the mode for memory devices. Switch them to AHCI, save settings and restart the computer. After the restart, Windows will start installation of SATA drivers, and when it is over, it will ask you for another restart. Do it, and AHCI mode in Windows will be enabled.

When using the workstation's Intel AHCI integrated disk controller, you must configure the SATA disks for AHCI or Intel RAID before installing Windows. Describes Windows XP* operating system installation problem with stop error Your Serial ATA (SATA) hard drive is set to AHCI mode in BIOS, and. May to enable AHCI for SATA on a computer with a Windows OS installed. disk with Windows XP to the system with AHCI-enabled controllers.